Tips on How to Fix Paver Steps

Can You Repair Paver Steps?

It is important to know how to fix loose pavers not only for aesthetic reasons but also for safety reasons. So if you want to know how to fix paver steps, you should read the following information on why the paving stones have become loose and the ways to go about fixing loose paving stones.

Why Are the Paving Stones Coming Loose?

Below are some reasons the pavers become loose that you need to be aware of. It will allow you to repair the issue properly so they are safe to step on.

1. There is too much space between the pavers if spacers were not used during the installation.
2. The base may have shifted and dislodged the pavers.
3. There is insufficient sand to keep the pavers securely in place.
4. Pavers do wear around the edges in time, which causes weird spacing.
5. They could have absorbed moisture and become damaged if they are not inclined to let water flow smoothly.

How to Fix Loose Pavers

By adding more sand you will strengthen the base and fix the loose pavers. Here is a step-by-step on how to fix paver steps:

1. Remove the loose paving stone and spread out the sand into a flat layer. Stamp it down so it has an even and solid base, this will create a strong base for the paver to sit on.
2. Put the paver back into the space and then adjust the sand until all the pavers are on the same level.
3. Gently tap the paver into place using a rubber mallet. Adjust the sand and tap until the paver is at the correct level.

Innovative Solutions on How to Fix Paver Steps

Now that you know what is needed to fix the paver step, if it all seems too much for you, contact our paving repair service today. For information about the services and products that EDM Asphalt Paving Sealcoating And Repair has to offer, please do not hesitate to dial this number (470) 243-7108 now. We are based in the Jasper, GA area. Leave the hard work to us!